GPH-110GF, GREY, 33M X 19MM

VHB TM GPH Series Product Data Sheet September 2018 Supersedes: February 2017 Product Description 3M™ VHB™ GPH Series, a general purpose, high temperature, grey conformable double coated acrylic foam tape with a high initial tack and a soft foam. Available in three different thicknesses with a 3M branded red siliconised polyethylene film liner. Key Features • • • • • • • Applications & Benefits Double coated acrylic foam tape 100 % closed cell acrylic foam High temperature performance (short term 230 °C) Good balance of high temperature and peel & shear performance High initial tack Soft foam enables stress relaxation & an easy application Good sealing properties • For indoor and outdoor applications • Its temperature performance enables bonding of materials in applications with high operating temperatures such as prior to processing in a powder coating line • Capability to bond to a variety of substrates makes it a good fit for multi material bonding - those substrates have a high or medium surface energy including many metals (e.g. stainless steel) and plastics (e.g. Polyamide, PMMA, ABS) • For applications in metal working, signage, appliances and specialty vehicle Physical Properties GPH-060GF Adhesive Type Thickness acc. to ASTM D-3652 GPH-110GF GPH-160GF Acrylic foam adhesive 0.60 mm 1.10 mm 1.60 mm Foam Density 710 kg/m³ Release Liner 3M branded red siliconised polyethylene film Tape Colour Grey VHB™ GPH Series September 2017 Performance Characteristics Type 90 ° Peel adhesion to Stainless Steel acc. to ASTM D3330, 90° peel angle @ RT, after 72h @ RT dwell 90 ° Peel adhesion to PA6 acc. to ASTM D3330, 90° peel angle @ RT, after 72h @ RT dwell 90 ° Peel adhesion to ABS acc. to ASTM D3330, 90° peel angle @ RT, after 72h @ RT dwell 90 ° Peel adhesion to PMMA acc. to ASTM D3330, 90° peel angle @ RT, after 72h @ RT dwell Dynamic Shear acc. to ASTM D1002 on stainless steel, after 72h @ RT dwell GPH060GF GPH110GF GPH160GF 25 N/cm 37 N/cm 34 N/cm 33 N/cm 48 N/cm 55 N/cm 21 N/cm 33 N/cm 32 N/cm 21 N/cm 34 N/cm 37 N/cm 547 N/6.54 cm² 476 N/6.54 cm² 375 N/6.54 cm² Static Shear Strength acc. to ASTM D3654, after 72h @ RT dwell (Weight held for 10.000 minutes to stainless steel, 3.32cm² (0.5in²) Normal Tensile (T-Block) acc. to ASTM D897 to Aluminium @ RT, after 72h @ RT dwell, 6.45 cm², test speed 50 mm/min Temperature Performance Application Temperature 23 °C - 1000 g 150 °C - 500 g 410 N/6.54 cm² 439 N/6.54 cm² 470 N/6.54 cm² Short term (minutes, hours): 230 °C Long term (days, weeks): 150 °C Ideal application temperature range is 21 °C to 38 °C. Pressure sensitive adhesives use viscous flow to achieve substrate contact area. Low Temperature Application: 3M ™ VHB™ GPH Tape be applied at 10 °C and down to 5 °C when using 3M Adhesion Promoter AP111 or Primer 94 To obtain good performance with all 3M™ VHB™ Tapes, it is important to ensure that the surfaces are clean, dry and free of condensed moisture. Shelf Life 24 months from date of production when stored at 16 °C – 25 °C and 40-65 % relative humidity. Performance of tapes is not projected to change even after shelf life expires; however, 3M does suggest that 3M™ VHB™ Tapes are used prior to the shelf life date whenever possible. VHB™ GPH Series September 2017 Important Notice All statements, technical information and recommendations contained in this document are based upon tests or experience that 3M believes are reliable. However, many factors beyond 3M’s control can affect the use and performance of a 3M product in a particular application, including the conditions under which the product is used and the time and environmental conditions in which the product is expected to perform. Since these factors are uniquely within the user’s knowledge and control, it is essential that the user evaluate the 3M product to determine whether it is fit for a particular purpose and suitable for the user’s method or application. All questions of liability relating to this product are governed by the terms of the sale subject, where applicable, to the prevailing law. Values presented have been determined by standard test methods and are average values not to be used for specification purposes. Our recommendations on the use of our products are based on tests believed to be reliable but we would ask that you conduct your own tests to determine their suitability for your applications. This is because 3M cannot accept any responsibility or liability direct or consequential for loss or damage caused as a result of our recommendations. 3M and VHB are trademarks of the 3M Company 3M United Kingdom PLC 2M Centre, Cain Road, Bracknell RG12 8HT United Kingdom 3M Svenska AB Herrjärva torg 4 170 67 Solna Sweden 3M Eesti OÜ Pärnu mnt. 158 11317 Tallinn Estonia 3M Ireland Ltd The Iveagh Building, 3rd Floor The Park, Carrickmines 18 Ireland 3M a/s Hannemanns Allé 53 DK-2300 Copenhagen S. Denmark 3M Latvia SIA K.Ulmaņa gatve 5 Rīga, LV-1004 Latvia 3M Belgium bvba/sprl Hermeslaan 7 1831 Diegem Belgium 3M Norge AS Tærudgata 16 2004 Lillestrøm Norway 3M Lietuva UAB A.Goštauto g. 40 Vilnius LT- 03163 Lithuania 3M Nederland B.V. Molengraaffsingel 29 2629 JD Delft The Netherlands Suomen 3M Oy Keilaranta 6 02150 Espoo Finland